Konica Web conection access is needed for KUARIO Kiosk. You can log in with same administrative password as you use on the device.
Type in the IP-address of your MFP in your browser and continue.
Are you watching this instruction on your phone?
Please make sure your rotate function is active and watch it in the 'landscape' orientation.
When ready, please start the presentation!
Setup your Konica
Bizhub iSeries device for
KUARIO Kiosk
You should now be able to use KUARIO Kiosk on your Konica device!
Certified Devices
You can install KUARIO Kiosk on KUARIO certified devices. In general these are Bizhub machines running the Chromium webbrowser.
We recommend using Bizhub iSeries as they have a faster response time and therefore a better user experience.
Your Bizhub iSeries interfaces should look like this:
Bizhub iSeries
Click the arrow to continue.
MFP interface
Web interface
Requirements
It is recommended to solely run the KUARIO Web Kiosk application on the MFP. This means that if any other application have been installed on the MFP, it is best to uninstall them all before installing the KUARIO Web Kiosk.
After that the KUARIO Kiosk Hardware setup instuctions must be followed.
When those have been succesfully completed continue with this manual.
Log in with your Konica Administrative account.
Go to System settings.
Remove all functions that may not be used outside of KUARIO Web Kiosk.
To Remove a key function, set it to OFF.
Confirm with OK.
Go to Network.
Go to TCP/IP Setting.
Set filtering type to IP Address Filtering and confirm with OK.
Go to Filtering Type.
Go to Network -> Web Browser Settings.
Set both addresses in one range to the address of the KUARIO Smart Connector.
Make sure to set one IP or IP-range so that it includes your workstation to keep your access to the MFP.
Note:
If you do not, you will lock yourself out of this MFP!
Click OK to confirm.
Select Administrator
You now have concluded the installation.
Please test if you are unable to do actions outside the system or if you are able to print, copy or scan without paying.
If you are able do do any of those actions, please retrace your steps and make sure you followed all the steps.
Depeding on your configuration you should be required to pay for each product.
Otherwise contact KUARIO Support.
Go to Filtering Type.
Go to Web Browser Settings.
Enable Web Browser.
Go to Network -> HTTP Server Settings.
Enable the IPP Setting.
Tick the box Open Printer Attributes.
Remove all other check in the other checkboxes.
Disable IPP Authentication Setting.
Set IPP-SSL Setting to SSL/Non-SSL
Go to Network -> FTP Setting -> FTP TX Setting.
Enable FTP TX.
Make sure the Proxy Server Port Number is 21 and the Connection Timeout is 60.
Go to System Settings -> Web Browser Settings -> Detail Settings.
Set Enable Cache to OFF.
Set Enable Cache to OFF.
Set Enable Cache to OFF.
Scroll down.
Set TLS1.2 to Enable.
Go to Network -> Open API Setting.
Set SSL/Port Settings to SLL Only.
Go to Security -> PKI Settings -> Device Certificate Setting
If a valid certificate is present, this should be fine.
You should continue to the next step by clicking on this message.
Otherwise click New Registration
(continue with the right green arrow).
Fill in all the fields and finish the self-signed certificate process.
Select the file from the PC and finish the import certificate process.
Go to Security -> PKI Settings -> Enable SSL Version.
Set Mode to Admin Mode and User Mode.
Set Encryption Strength to AES-356, 3DES-168, RC4-128. This ensures that the most secure option available will be used.
Go to Security -> PKI Settings -> Protocol Settings.
If you have a certificate prepared, select Import certificate. If you have not select Create and install a self-signed Certificate.
Select one now in this guide to continue to the next step.
Select TCP Socket and click Edit.
Make the certificate you selected earlier is also the certificate you have selected here.
Naturally the certificate must be valid.
Select OpenAPI and click Edit.
Make the certificate you selected earlier is also the certificate you have selected here.
Naturally the certificate must be valid.
Select WebDAV and click Edit. (optional WebDAV might not be used)
Make the certificate you selected earlier is also the certificate you have selected here.
Naturally the certificate must be valid.

To reboot the MFP, click the On/Off button on the panel.
Note! The MFP must be rebooted to finish the setup process. Please reboot the MFP using the On/Off button on the panel.
Note! The next steps MUST be executed on the MFP, these settings can not be found or edited remotely!
Go to the MFP and log in as Administrator.
Go to Network -> TCP / IP Setting -> TCP / IP Setting1.
Enable TCP/IP.
Go to Network -> TCP / IP Setting -> TCP / IP Setting2.
Make sure Port 1 is set to 9100.
Go to IP Address Filtering.
Go on to the Utility menu, using Administrator credentials, Navigate to Network -> OpenAPI Settings.
Enable Specified Application Settings.
Disable Basic Functionering.
Select KUARIO Web Kiosk as Default Start Application.
KUARIO Outlet for Web Kiosk
Before continuing a KUARIO Outlet must be created for this device. As Konica uses KUARIO Web KIOSK you need to create a Outlet for Web Kiosk.
Click this text to go to the KUARIO Outlet for KUARIO Kiosk Instructions.
When those have been succesfully completed continue with this manual.
Confirm to shut down by clicking yes. When MFP is completly shut down, power the MFP up, using the On/Off button on the panel.
